Home page  |  About Us  Our Products  |  Our Services  |  Order Page  |  Contact Us  
 
bearings high speed

bearing Chrome

One Way Beings

Deep groove ball bearings

Angular contact ball bearings

Spindle bearings

Four point contact bearings

Self-aligning ball bearings

Thin section bearings

Cylindrical roller bearings

Tapered roller bearings

Barrel roller bearings

Spherical roller bearings

Needle roller and cage assemblies

Drawn cup needle roller bearings with open ends/closed ends

Machined needle roller bearings

Drawn cup roller clutches

Sealing rings

Axial deep groove ball bearings

Axial angular contact ball bearings

Bearings for screw drives

Rotary table bearings

Radial insert ball bearings / Housing units / Roller chain idler sprocket units idler pulley units

Bearing housings

ELGES spherical plain bearings, rod ends

Permaglide

Axial cylindrical roller bearings / Axial cylindrical roller and cage assemblies / Axial bearing washers

Axial needle roller and cage assemblies / Axial bearing washer / Axial needle roller bearings

Axial spherical roller bearings

Crossed roller bearings

Slewing rings

Track rollers

 

Bearing housings

 
 

FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment.

FAG bearing housings are predominantly made from flake graphite cast iron. Housings made from cast steel and spheroidal graphite cast iron can be supplied by agreement. Since the bearings are normally lubricated with grease and the initial charge is effective for a long period, most housings do not have relubrication holes. However, gates or marks are present so that lubrication holes can be made if required. When relubrication is carried out, it must be ensured that excess grease can escape.

The bearing seats in the housing are generally machined such that the bearings are movable and can thus act as non-locating bearings. Locating bearing arrangements can be achieved by inserting locating rings if these are listed in the tables. Locating rings must be ordered specifically. Housings without locating rings are supplied in a non-locating bearing version (L) or a locating bearing version (F).

All unmachined outer surfaces of FAG housings and housing parts have a universal coat of paint (colour RAL 7031, bluish grey). The paint can be covered by all resin, polyurethane, acrylic, epoxy resin, chlorine rubber, cellulose and acid-hardening hammer grey enamels. The anti-corrosion protection of the machined inner and outer surfaces can be easily removed.

Depending on the operating conditions, contact seals, non-contact seals and combinations thereof are available for sealing of bearing housings, see the schematics.

   

Copyright © 2007 Arian Co All rights reserved
Web designed by Reverya Web Solutions .

Arian Company
Aleppo - Syrian Arab Republic
Bustan Kulab - Addas building

Tel 
      
Fax
: + 963 21 2117990
: + 963 21 2117991
: + 963 21 2117992

Home page  |  About Us  Our Products  |  Our Services  |  Order Page  |  Contact Us